Metric Sections 100-300
| Standard Drawings |
English Metric |
Sections 100 - 300 |
Sections 400, 500 |
Section 600 |
Section 700 |
Section 800 |
Revised & New Drawings Effective 09/01/07 |
| Effective for Lettings on or after September 1, 2007 |
| Section 100 - General Provisions Section 200 - Earthwork Section 300 - Bases |
| Last Updated: 6/17/11 |
Ref. |
Title | Description | Date |
| 105-RBCL-01 | Road and Bridge Contract Limits | Road & Bridge Contract Limits | 9/1/00 |
| 205-TECD-01 | Temporary Erosion Control Ditch | Temporary Check Dam, Revetment Rip Rap | 9/4/07 |
| 205-TECD-02 | Temporary Erosion Control Ditch | Temporary Check Dam, Straw Bales | 9/4/07 |
| 205-TECD-04 | Temporary Erosion Control Ditch | Temporary Sediment Trap | 3/1/04 |
| 205-TECI-01 | Temporary Erosion Control Inlet | Temporary Ditch Inlet Protection, Aggregate Ring | 3/1/02 |
| 205-TECI-02 | Temporary Erosion Control Inlet | Temporary Ditch Inlet Protection, Geotextile Box | 3/1/02 |
| 205-TECI-03 | Temporary Erosion Control Inlet | Temporary Ditch Inlet Protection, Slotted Barrel | 3/1/02 |
| 205-TECP-02 | Temporary Erosion Control Perimeter | Temporary Silt Fence | 3/1/02 |
| 205-TECS-01 | Temporary Erosion Control Slope | Temporary Interceptor Ditch | 3/1/02 |
| 205-TECS-02 | Temporary Erosion Control Slope | Temporary Slope Drain | 9/4/07 |
| 205-TECS-03 | Temporary Erosion Control Slope | Temporary Slope Drain | 9/4/01 |
| 211-BFIL-01 | Bridge Fill | Part Plan for Flared Wings | 3/3/03 |
| 211-BFIL-02 | Bridge Fill | Flared Wings Typical Cross Section | 9/30/94 |
| 211-BFIL-03 | Bridge Fill | Backfill Placement at Interior Support | 9/2/03 |
| 211-BFIL-04 | Bridge Fill | Backfill Placement at End Bent, Beam Structure | 9/2/03 |
| 211-BFIL-05 | Bridge Fill | Backfill Placement at End Bent, Slab Structure | 9/1/04 |
| 303-STRW-01 | Shoulder Treatment Resurfacing Work | Shoulder Treatment for Resurfacing Work | 9/4/07 |
| 306-TMPT-01 | HMA Pavement Wedging/Transition Milling | HMA Pavement Wedging/Transition Milling | 9/4/07 |
